Sale!

ADEAGA commercial faucet installation kit with two 1/2 in. NPT brass elbow adapters

1/2 in. NPT brass elbow adapter dimensions for wall mount commercial faucet

Oversized rubber washer sealing the backsplash hole of a commercial sink

One-piece cast solid brass commercial faucet mounting adapter

90-degree elbow adapter needs only 1.5 in. of space behind the sink

How to install a wall mount commercial faucet with the brass elbow adapter kit

Commercial faucet installation kit mounted on a stainless steel prep sink

Commercial Faucet Installation Kit, 1/2 in. NPT (2-Pack)

Original price was: $25.49.Current price is: $23.09.

1/2 IN. NPT BOTH ENDS: Two short elbow adapters with a 1/2 in. NPT male inlet and male outlet, made for wall mount commercial faucets with 1/2 in. NPT female x male connections.
OVERSIZED RUBBER WASHERS: Wider washers cover backsplash holes up to 1.3 in. across, so they seal tight and never slip through, tear or get stuck behind the sink.
ONE-PIECE SOLID BRASS: Each adapter is cast from a single piece of solid brass for a strong, leak-resistant connection that stands up to busy kitchens.
ONLY 1.5 IN. BEHIND THE SINK: The 90-degree elbow turns the supply line down right at the wall, saving space and taking strain off the water line.
QUICK TO INSTALL: Long end to the faucet, short end to the supply pipe, tighten the lock nut and wrap the threads with tape.

SKU: B0GXF665QX Categories: Accessories, Faucet Accessories

The ADEAGA commercial faucet installation kit is the missing piece for mounting a wall mount faucet on a stainless steel prep sink, utility sink or backsplash. Each solid brass elbow adapter passes through the backsplash, takes the faucet on one side and the water supply on the other, and turns the connection 90 degrees so you only need about 1.5 inches of room behind the sink. Oversized rubber washers cover the mounting hole completely for a firm, watertight fit.

Key Features

1/2 in. NPT Connections — male inlet and male outlet fit standard wall mount commercial faucets with 1/2 in. NPT female x male fittings.
Oversized Washers — cover backsplash holes up to 1.3 in. in diameter for a secure, sealed mount.
One-Piece Brass Body — cast solid brass resists corrosion in restaurants, cafeterias and other high-use kitchens.
Space-Saving Elbow — needs only 1.5 in. of clearance behind the sink and reduces stress on the supply line.

Specifications

Brand	ADEAGA
Model	DG8025X
Connection	1/2 in. NPT male x 1/2 in. NPT male
Material	Solid brass, one-piece cast
Pieces	2 elbow adapters with washers and lock nuts
Fits Mounting Holes	Up to 1.3 in. diameter
Clearance Behind Sink	Approx. 1.5 in.
Application	Commercial prep sinks, utility sinks, backsplash mount faucets